![iomega storcenter ix2 replace both disks iomega storcenter ix2 replace both disks](https://image.slidesharecdn.com/updateiomegaix2-200drivefirmware-120217021135-phpapp01/95/update-iomega-ix2-200-drive-firmware-11-728.jpg)
However, again the connection could only be made when forcing the Mac's NIC to 100 Mb/s.
Iomega storcenter ix2 replace both disks pro#
I was able to enable the DHCP-server (bootpd) on my 2011 MacBook Pro and use it to connect to the Storcenter via a single Ethernet cable. Unfortunately the only other router I own is a Airport Express, which only has a 100 Mb/s Ethernet port. I tried different cables, confirmed the cables connecting at 1 Gb/s with the R7000 using another machine, and tried to force the NIC into a 1 Gb/s connection using both ethtool and mii-tool all to no avail. I was hoping that somebody with more know-how ?) could help me with this issue. However, one thing has been bothering me for quite a while now I am unable to connect the Storcenter at 1Gb/s to my R7000 (running dd-wrt). Installing Archlinuxarm has really put the life back into this aging NAS-box. I'm on the latest kirkwood-dt kernel using the kirkwood-iomega_ix2_200.dts overlay. ( read: factory defaults) To which I ran my own shred on both /dev/sda2 and /dev/sdb2.I own an Iomega Storcenter ix2-200 and installed Archlinuxarm following the instructions posted by Sven Kiljan at notably those on the headless preparation (i.e., not via TTL). When it finished and re-initialized I restarted it, and I STILL had root access. Think you might donate or craigslist your old NAS drive? Well if it’s an Iomega – don’t rely on the built in “Secure Erase” to protect your data! A single pass ( while at least random data) is going to be slightly better then a “quick format”. Iomega changed it to make a single 1 time pass! ? I looked quickly at the man page for shred. Not only could I still log in to the ix2, I found the program that it was running to wipe the drive: I was also curious if this would affect my ability to SSH into the machine. Just like when it gets stuck doing a rebuild, I wanted to see what it was up to. …and the outcome? Well I clicked it, confirmed it, and watched as the red light came on and the drives started to chug. The disk erase process overwrites all disks with random data to prevent recovery of existing or deleted data, users, and passwords. Disk erase is a secure operation to ensure all data on your Iomega StorCenter device is irrecoverably deleted. For those of you who don’t know me – here is the setup.Īll data is permanently erased and overwritten to prevent recovery, user information is removed, and the device is reset to factory defaults. The second message talks about how securely erased your drives will be. The first message tells you that you’ll need to delete all the shares ( including the built in ones?!) before using the wipe functionality. I go into the manage disk section and I’m excited to see there is an Erase Disks section under Manage Disks. The replacement WD Green and the old original 500GB Seagate spin up and after a few minutes I can login via the web interface.
![iomega storcenter ix2 replace both disks iomega storcenter ix2 replace both disks](https://i.ytimg.com/vi/k7ZoAYjEQ2o/hqdefault.jpg)
( more on that later) I was doing some consolidation and cleaning of the computer room yesterday and I decided it was time to wipe some hard drives including the ix2 NAS. The second drive failed and it has been replaced with a Synology DiskStation DS212j with WD Red drives. Disappointing finish for my Iomega StorCenter ix2.